Masa Paper Pumpkin Basket

 The reference photo for this was from Jen Green on Paint My Photo. I also had students look at other pictures of pumpkins, gourds, for inspiration for their individual paintings.

I drew this on masa paper. Draw on the rough, not smooth, side. Make sure your pencil marks are dark enough to see. This is different from other papers. You WANT to see your drawing, because, as you wet the paper, the graphite will disappear. (sometimes I have done the drawing with fine pen)

I made several changes. I took out the barn in the background. I wanted to keep it simple so that people could add their own elements--gourds, other veggies, etc. -- to personalize it. 

I began this as I do most of my masa paper paintings: first drawing while it's flat; second, wrinkle and wad up the paper; third, soak the paper. I lay it on a towel to soak up excess water--then on a paper towel while I am painting wet on wet. (A doggie pad is great)

Then I lay in wet washes of color, trying not to get caught up on what object is blue, what is orange, etc.  Usually I begin with one of every primary and let the colors mingle on the paper.

I try to be very free with color, to allow it all to blend together. (you can see how blue got onto two of the pumpkins. I like doing that.)  I only get specific with color if one area MUST be white or yellow. 

I blew it all dry, then started painting some of the positive shapes.

I haven't glued down my work yet. You can see I've improvised on the objects...some small gourds on the bottom left; changing apples and leaves to green gourds in the basket. I do as much painting as possible before mounting on a piece of paper or board. 

This paper tends to "pill", so be gentle with it. I made a field of flowers where the barn was.

Those are made by negative painting greens around spots where there was already some background pinks and yellows (from my original washes.).

YOU HAVE TO DRY the painting each time you want to work on it. Otherwise you will rip it, or the layers will never get darker. 

I noticed that the area of flowers seemed too thick and unyielding. I thought of my stencils

that we used on the printing project. So I lay one of the stencils over the flower area, gently rubbed some damp Mr. Clean sponge, and picked up some new white areas. 

Gluing the painting down:

My favorite glue of choice is YES paste, but you can use matte medium, which is archival, or any white glue if you don't care if it is archival or acid free. Glue it to paper, board that has been gessoed, or your choice. I put glue on the board, then lay the painting over it. Cover it with wax paper, then start pressing it down, beginning at the center and working outward to the ends. 

When it is completely dry, you can continue working on this. Some people prefer to work on it after the bumps are worked out and it feels flatter. You will be able to get some detail work in, or add some pastels  or pen if you like.

After I glued this down, I did a few enhancements with pastel: Highlights on some of the pumpkins; pumping up some of the flower colors; making some straw on the bottom.

John's finished work. I like how the background layer comes through and gives a looser look.

The less you paint on this, generally the better it will look.

Here are some other masa paper projects I've done in this blog:

https://www.blogger.com/blog/post/edit/8812132386157895665/2357452782375511562

Watercolor Canvas

Painting on Watercolor Canvas

Painting on watercolor canvas is completely different from most other surfaces I've used. (This is high quality canvas treated with a ground that accepts watercolor.) The paint sits on top of the canvas instead of being absorbed into the paper, so it stays bright. You don't get backruns. The paint can be lifted over and over again. But I have to admit, it feels weird at first.

I can't say I'd use it for a lot of the things I paint, in particular portraits. But landscapes, sunsets, and still life would be my choices for this.

I made the mistake of buying a PAD of Fredrix watercolor canvas instead of board.

Loose canvas DOES NOT act at all like paper. The minute a brush touches the canvas, it curls and warps. A LOT. It's impossible to paint on.  So...you either have to attach it to a gatorboard .....(see below)...with staples...

Or glue it to some heavy surface. I tried gluing it to the heavy board from the back of an empty watercolor block, and also to some wood board.

To stretch it to a gatorboard, wet the canvas -- I mean soak it for 15-20 min-- and staple it to the board. Dry –you can use a hair dryer.

Or dampen the canvas and glue to a panel with YES paste, or heavy gel, which is more archival. You can also try matte medium, but that won't be as permanent a glue as gel. You will need to flatten it and dry it overnight before using.

*I also tried some of the spray glues....you would not have to wet the canvas before gluing it to a board. It seemed pretty successful, and I didn't have to wait for it to dry.

I purchased the pad because I thought it would be more economical for a class project. (About $22 for a pad of 10 12x16 pieces....about $10 for one 11 x 14 board...and about $18 for a 12 x 16 stretched canvas) So even with the glue and board support, it was still more economical. Just more work than I anticipated.

Watercolor Tips and Tricks from Tom Lynch

Tom Lynch is a watercolor artist who has been experimenting with watercolor canvas from Fredrix for at least 15 years now. Below is a link to several pages of tips to make your experience with canvas a lot easier. (not a video, although you can find some of his videos on youtube)

https://fredrixartistcanvas.com/archives/1874

The ones you most need to remember are:

1. If you are using a canvas pad, you MUST stretch it onto a gatorboard or glue it to a hard surface. By itself, it buckles and curls too much to be used.

2. After stretching (or attaching to board) Wipe it down with water and a cloth rag before painting on it. This will also help lighten your pencil lines. Then dry with hair dryer or air dry for 10 minutes.

The first thing you will notice about painting with this is that you can remove paint easily. This is a plus for removing mistakes or making changes; a negative for glazing processes. So if you want to glaze, you have to use a soft brush and very few strokes, otherwise the lower paint layer will lift.

Wet on wet acts a little differently. You still get blends, but it's just different.

You don't have to worry about hard lines that much. They are easy to soften and lift.

It seems to "pill" when you paint on it. That is lessened if you wipe it down with water and a rag before painting. 

FINISHING: After the painting is dry, it should be varnished if you don't want to put it under glass. I use Krylon's Kamar Varnish, which is a spray made for watercolor, acrylic, or oil. To apply it, spray lightly for a first coat. This sets the watercolor. A heavier first coat could rewet the paint and cause it to run or smear. After the first light coat has dried, you can apply one or two more coats. Dry and pop into a frame.

Here are some results from class:

Here is one more result from the board with watercolor ground last week:

How to prepare a regular canvas to use watercolor (using ground)

https://www.youtube.com/watch?app=desktop&v=IOuCvW9Ws88

A short demo of using canvas:

https://www.youtube.com/watch?v=H6LVcnwhdIU

Tom LYnch using wc canvas:

https://www.youtube.com/watch?v=npGvQbCIfPY

Board coated with Watercolor Ground

 

Watercolor on Watercolor Ground

You can purchase an archival treated board (Ampersand Aquabord) from Dick Blick or other art outlets. However, you can also make your own from a wood board and some Watercolor Ground.

A "ground" is simply a medium that makes a surface capable of absorbing whatever paint you want to use, in this case watercolor. QoR makes a ground, as does Daniel Smith. Daniel Smith makes it in 6 colors: White, Buff Titanium, Transparent, Black, Pearlescent, and Gold. I've used Daniel Smith before, but wanted to try QoR (by Golden) brand. 

A ground like this can be added to many surfaces: wood, glass, plexiglas, metal, mat board, plastic, etc. 

To prepare the wood, I first put two layers of gesso on it. To apply it so that the surface is fairly smooth: Brush it on, then roll it with small sponge paint roller. After the gesso dried, I applied 3 layers of watercolor ground, with the same technique: brush it on, roll with small paint roller, dry completely.

After 3 layers, I dried it for at least 48 hours. (Instructions say 24-48, but I like to be certain it is completely dry.)

Cost-wise, this is much more economical than purchasing aquabord, especially if you have access to a lot of wood. I did 12 8x8 boards with half a jar of ground. I got QoR ground on sale at Blicks for around $12...Amazon also sells it for about $14 for 8 oz. (237 ml) But a jar will make about 20 8 x 8 boards. 

For this project, I wanted students to experience several things: How does it absorb the paint? How well does it glaze? How well does it lift? Can you do wet into wet? The feel of brush against surface is very different than paper.

First, everyone copied the subject with Saral, since you obviously can't use a light box.

Be careful not to smudge or copy too dark. GRAPHITE DOES NOT ERASE WELL on this surface. If you are drawing you can use watercolor pencil, as it will erase with water.

For my reference I used a photo by Stuart Swain from Paint My Photo.

The first technique I wanted to show was how it performs wet on dry. The middle bit of foliage is done first. Using a medium green (like sap) and a dark green (I used green apatite genuine) and a yellow, I applied dabs of paint, alternating the colors and leaving tiny bits of WHITE. It's a very impressionistic method and look.

(If your greens are limited, you can make a medium green look darker and shadowy by adding purple to it.)

You will notice that it doesn't take long for this to dry.

Next I used a flower color (in one I used magenta and violet, and in the one above I used coral and orange). I used the same process, making clusters of flower color, NOT POLKA DOTS. After the flowers dried, I used a lighter green (medium green with yellow) to put in the foliage. I still left tiny bits of white. At the same time, I used the green in a negative painting way to shape the flowers more. Then I added a few tiny bits of darker color in some centers.

The umbrellas used a glazing technique. For each one, I glazed over with a pale shade. (for example, with this first one, I used pale yellow). I dried it. Then I left the first row yellow, then painted all the others pale orange. Dry. Finally, I painted the top section a dark orange, adding in a very dark at the very top.

I did this process with each successive umbrella.

All that is left is a cerulean wash for the sky, lifting some clouds if you want it while paint is wet.

I blushed over the tops of the poles with a wet brush, dragging some of the dark paint over the pole tops. 

(The sun would reflect some of the umbrella color onto the poles) When dry, I shaded the left side of the poles. I used a very fine liner brush to paint in the umbrella ribs. I also shade one side of the umbrella to give a little depth.

I had everyone try to lift some paint. Watercolor lifts easily from the ground. If you only want to lighten a color, just wet the area in the shape you want; if you want it back to white, wet it and blot it to lift. You do not need a stiff brush to lift.

IF I WERE TO DO THIS AGAIN, I would paint in the umbrellas before some of the foliage that goes in front of it so I wasn't having to avoid the greens while I painted. I could have just lifted off parts of the umbrella where I wanted to paint green, since it's so easy to lift)

Positives:

1. Lifts back to white easily. Therefore, easy to correct mistakes. And the lifting does not damage the surface, so I can paint over it as much as I like. 

2. Colors sit on top a little more, so look vibrant.

3. You can do some glazing, as long as you use a soft brush and don't accidentally lift the lower layer of paint.

4. You can take the entire board back to white, but not over and over again.

5. You do not need to mat or frame under glass. You can just use a spray varnish (like Kamar) to protect it.

Negatives:

1. Pencil marks do not erase.

2. Sometimes it is TOO easy to lift.

Below is the painting on regular paper.  Since this painting is so small (8x8) I didn't do some of the shading and details I might have if it were larger.