REMOVING WAX FROM BATIK
You need to look at the blog from Nov. 21, 2024 to see instructions for removing the wax from your batik.
https://dearingcampbell.blogspot.com/2024/11/
If the link doesn't work, just go to the blog sidebar, find November, 2024, and it should come up for you. In this blog, it recommends FREEZING after your final wax. We did not do that in class this time because the paper was a bit brittle, and I didn't want it to completely fall apart. But normally, I freeze it for 5 minutes to get some good crevices.
After you get all the wax off, you can glue the picture to a piece of watercolor paper (don't need an expensive brand). You can use just Elmer's if you don't care if your piece is archival. I usually will use YES paste, matte medium gel, or something more permanent, since I either show or sell mine.
When it is completely dry, you can use other mediums to "fix" problems in the painting.
USING THE RICE PAPER
If there is a place that is too dark, you can tear pieces of the rice paper to patch it using some matte medium to glue it over the piece. I save scraps from the edges where I cut it down, and use them for patches. You can cut or tear out pieces of the white rice paper to form clouds or other shapes.
If your paper has torn, you can repair it by gluing similarly colored rice paper right over the hole.
On this picture of the light house, I tore out some white paper for clouds. Also, I tore a small piece of blue to lighten one of the edges at the top of the lighthouse, which had gotten darker than I wanted.
On the picture of the koi, I cut out white fish shapes and added to the painting.


